Legoplast - heavy duty plastic rebar chairs and supports

2 mm Shim Pad

Tue, 19 May 2026 13:01:00 +0400

Thin heavy-duty leveling shim pad designed for fine height adjustment and precise alignment in concrete, masonry and general construction works. Manufactured from recycled polypropylene in the UAE, the 70×70×2 mm pad is suitable for use under pads, blocks, tiles and structural elements where minor tolerance correction is required.

3 mm Shim Pad

Tue, 19 May 2026 12:00:00 +0400

Robust 3 mm leveling shim pad for accurate leveling and packing of structural components, formwork and prefabricated elements on site. The 70×70×3 mm pad is injection-moulded from recycled polypropylene, offering durable, moisture-resistant support while contributing to green building practices.

5 mm Shim Pad

Tue, 19 May 2026 11:00:00 +0400

Heavy-duty 5 mm leveling shim pad engineered for medium height correction and stable bearing under higher imposed loads in structural and architectural applications. Produced from recycled polypropylene, the 70×70×5 mm pad provides a rigid, non-corroding support solution for concrete units, stone, precast elements and equipment bases.

10 mm Shim Pad

Tue, 19 May 2026 10:00:00 +0400

Extra-thick 10 mm leveling shim pad for significant height adjustment, packing and load distribution beneath heavy structural members and equipment. The 70×70×10 mm pad is made in Dubai from recycled polypropylene, ensuring high mechanical strength, impact and moisture resistance and supporting sustainable construction standards.

Open 75mm Pile Cage Spacer

Mon, 19 May 2025 18:33:19 +0400

The OPS75 open pile cage spacer (circular or wheel spacer) is designed to provide a 75 mm (3”) cover and spacing for pile cages in reinforced foundations such as in situ piling and diaphragm walls. It acts as a guide wheel when lowering the reinforcement cage into the ground, ensuring smooth sliding and compliance with concrete cover requirements. The OPS75 is attached to the external steelwork (rebar diameter from 10 to 20 mm, or rebar sizes #3 to #6) of pile cages to ensure correct spacing from shuttering. The product is fully compliant with CRSI Manual of Standard Practice (USA).

Closed 75mm Pile Cage Spacer

Mon, 19 May 2025 18:33:03 +0400

The CPS75 closed pile cage spacer (circular or wheel spacer) is designed to provide a 75 mm (3”) cover and spacing for pile cages in reinforced foundations such as in situ piling and diaphragm walls. It acts as a guide wheel when lowering the reinforcement cage into the ground, ensuring smooth sliding and compliance with concrete cover requirements. The CPS75 is attached to the external steelwork (rebar diameter from 10 to 20 mm, or rebar sizes #3 to #6) of pile cages to ensure correct spacing from shuttering. The product is fully compliant with CRSI Manual of Standard Practice (USA).

12mm Clip Spacer

Mon, 29 Jul 2024 19:11:22 +0400

Heavy-duty plastic clip spacer (also named 'A' Shape Spacer) designed to accept bars from 6 to 18 mm. 300% exceeds requirements of German performance class L2. Fully compliant to CRSI Manual of Standard Practice (USA). Recommended installation at 50 to 100 cm intervals. The spacer can be used for various applications in pre-cast or insitu concrete.

16mm Clip Spacer

Mon, 29 Jul 2024 19:11:19 +0400

20mm Clip Spacer

Mon, 29 Jul 2024 19:11:16 +0400

25mm Clip Spacer

Mon, 29 Jul 2024 19:11:13 +0400